7 Viral Steps: How To Make A Taba Squishy At Home Using The Latest Silicone Technique

The Taba Squishy phenomenon has taken the DIY craft world by storm, offering a superior level of tactile satisfaction compared to traditional foam squishies. As of late 2025, the secret to achieving that signature *slow-rebounding* and *jiggly* texture lies in using specialized liquid silicone, moving beyond the older, less satisfying methods. This comprehensive guide will walk you through the most current and effective technique to create your own high-quality, handmade Taba Squishy, perfect for *stress relief* and *sensory play*. This article is your ultimate resource for mastering the art of the Taba Squishy, detailing everything from the essential *food-grade silicone* materials to viral decorating *hacks* that will make your creation a standout piece. We’ll cover the professional method using a *two-part gel* system and explore popular *non-silicone alternatives* for beginners who want to try the trend right now.

The Ultimate Guide to Taba Squishy Materials and Kits

Creating a true Taba Squishy requires specific materials to achieve its characteristic soft, slow-rising, and satisfyingly *jiggly* feel. Unlike simple memory foam or sponge squishies, the authentic Taba Squishy is made from a specialized material.

Essential Materials for the Authentic Taba Squishy

The core of a Taba Squishy is its material, typically a *platinum-cured silicone* or a similar *liquid squishy gel*. This material is non-toxic, odorless, and chemically stable once cured, making it safe for handling.

• Taba Squishy Gel (Two-Part Liquid Silicone): This is the most crucial component. It usually comes as Gel A and Gel B, which must be mixed in a precise 1:1 ratio to initiate the *curing process*.
• Silicone Mold: You will need a mold to give your squishy its shape. Popular choices include *animal shapes* (like hamsters or dragons), *food items*, or simple geometric shapes.
• Mixing Tools: Disposable cups and stirring sticks are essential for mixing the *two-part gel* without contamination.
• Colorants: Highly pigmented *liquid silicone colorants* or specialized resin pigments are used to tint the gel. Avoid water-based paints, as they can interfere with the curing.
• Optional: Flocking Powder: For a soft, fuzzy, matte finish, *flocking powder* can be applied to the squishy after it has cured.

Taba Squishy Kits: The Beginner’s Best Friend

For those new to the craft, purchasing an all-in-one *DIY kit* is highly recommended. These kits contain pre-measured amounts of the *liquid squishy silicone*, molds, and sometimes even *flocking powder* and basic tools. They eliminate the guesswork of measuring and sourcing specialized materials, ensuring a higher chance of success on your first attempt.

Step-by-Step: Crafting Your Perfect Slow-Rebounding Taba Squishy

The process of making a silicone Taba Squishy is straightforward but requires precision, especially during the mixing phase. Follow these seven steps for the best results.

1. Prepare Your Workspace and Mold

Set up your area on a flat, level surface, and cover it with parchment paper or a silicone mat. Ensure your *silicone mold* is clean and completely dry. A level surface is vital to prevent the squishy from curing with a slanted bottom.

2. Mix the Taba Squishy Gel

Measure equal parts of Gel A and Gel B into a disposable mixing cup. The ratio must be exact (e.g., 50 grams of A and 50 grams of B). Mix thoroughly but slowly for 3-5 minutes, scraping the sides and bottom. Mixing too fast can introduce too many air bubbles, which will weaken the final squishy.

3. Add Color and Glitter (Optional)

If you want a colored squishy, add a few drops of your chosen *liquid silicone colorant* to the mixture. Stir gently until the color is uniform. This is also the time to mix in fine glitter or tiny decorative inclusions.

4. Pour the Silicone into the Mold

Slowly pour the mixed silicone *gel* into your *squishy mold*. Pour from a height to help pop any remaining air bubbles. Fill the mold completely to the top edge.

5. The Curing Process

Allow the Taba Squishy to cure according to the manufacturer's instructions, which typically takes 4 to 8 hours at room temperature. Do not touch or move the mold during this time. The silicone will transition from a liquid to a solid, elastic state. This *curing process* is what gives the squishy its *slow-rebounding* quality.

6. Demolding and Trimming

Once fully cured, carefully perform the *demolding* process by gently peeling the *silicone mold* away from the squishy. Use small, sharp scissors to trim any excess material (flash) from the edges.

7. Adding Flocking for Texture

For a popular fuzzy, *ASMR*-friendly texture, apply a thin layer of silicone glue or *PVA glue* to the squishy’s surface. Immediately sprinkle *flocking powder* (a fine fiber material) evenly over the glued area. Allow the glue to dry completely before handling. This step adds a unique *sensory* element to your finished Taba Squishy.

Viral Taba Squishy Hacks and Non-Silicone Alternatives

The Taba Squishy trend is constantly evolving, with crafters finding new ways to achieve the desired texture and aesthetics. While silicone is the gold standard, there are popular alternative methods for a quick DIY fix.

Hacks for the Perfect Jiggly Texture

One of the most sought-after qualities is the *jiggly* or "Pisgly" texture. This can often be enhanced by slightly adjusting the ratio of the two-part silicone gel, though this is an advanced technique that can risk the squishy not curing properly. A safer hack is to embed a small, soft core (like a tiny, cured silicone sphere) inside the main squishy before the final pour, creating a satisfying internal movement. Another viral trend is the use of *clear resin* or a clear silicone layer to create a "water-filled" look, though the core remains the soft *slow-rebounding* Taba material.

Non-Silicone Alternatives for Beginners

If you don't have access to *liquid squishy silicone* or a *DIY kit*, you can still create a satisfying, albeit different, squishy toy using common household materials. These alternatives are great for beginners and can be just as fun to decorate.

1. The Glue and Cornstarch Method

Mix *PVA glue* (white school glue) with cornstarch until a thick, dough-like consistency is achieved. Knead it until smooth. This mixture can be molded into *custom shapes* and allowed to air dry. The resulting squishy will be soft but will not have the same *slow-rebounding* property as silicone.

2. Memory Foam or Sponge Core

Cut a piece of *memory foam* or a soft kitchen sponge into your desired shape. Seal the sponge inside a balloon or a layer of plastic wrap for a smoother exterior. You can then paint the outside with *acrylic paint* mixed with a flexible sealant to prevent cracking.

3. Balloon and Flour/Water Beads

Fill a small, sturdy balloon with flour, cornstarch, or soft *water beads*. Tie it off securely. This creates a highly squeezable, stress-ball-like toy that mimics the *stress relief* aspect of a Taba Squishy. By following the detailed steps for the silicone method, or experimenting with the *non-silicone alternatives*, you can successfully join the *viral trend* and create your own unique Taba Squishy masterpiece today.